Specifications of Stainless Steel Sheet |
Standard | ASTM, JIS, DIN, AISI, KS, EN... |
Martensite-Ferritic | Ss 405 , 409, 409L, 410, 420, 420J1 , 420J2 , 420F , 430 ,431... |
Austenite Cr-Ni -Mn | 201, 202... |
Austenite Cr-Ni | 304, 304L, 309S, 310S... |
Austenite Cr-Ni -Mo | 316, 316L... |
Super Austenitic | 904L, 220 , 253MA, 254SMO, 654MO |
Duplex | S32304 , S32550 ,S31803 ,S32750 |
Austenitic | 1.4372 ,1.4373, 1.4310, 1.4305, 1.4301, 1.4306 , 1.4318 ,1.4335,
1.4833 , 1.4835 , 1.4845, 1.4841, 1.4401 , 1.4404 , 1.4571 ,1.4438,
1.4541 , 1.4878 , 1.4550 , 1.4539 , 1.4563 , 1.4547 |
Duplex | 1.4462 , 1.4362 ,1.4410 , 1.4507 |
Ferritic | 1.4512, 1.400 , 1.4016 ,1.4113 , 1.4510 ,1.4512, 1.4526 ,1.4521 ,
1.4530 , 1.4749 ,1.4057 |
Martensitic | 1.4006 , 1.4021 ,1.4418 ,S165M ,S135M |
Surface Finish | No. 1, No. 4, No. 8, HL, 2B, BA, Mirror... |
Specification | Thickness | 3-120mm |
Width*Length | 1000 x2000, 1219x2438, 1500x3000, 1800x6000, 2000x6000mm |
Payment Term | T/T, L/C |
Package | Export standard package or as your requirements |
Deliver Time | 7-10 working days |
MOQ | 1 Ton |
Chemical Composition |
Grade | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Ni | Cr |
201 | 0.15 | 1.00 | 5.50-7.50 | 0.500 | 0.03 | 3.50-5.50 | 16.00-18.00 |
202 | 0.15 | 1.00 | 7.50-10.00 | 0.500 | 0.03 | 4.00-6.00 | 17.00-19.00 |
304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-11.00 | 18.00-20.00 |
304L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-12.00 | 18.00-20.00 |
309 | 0.20 | 1.00 | 2.00 | 0.040 | 0.03 | 12.00-15.00 | 22.00-24.00 |
309S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 12.00-15.00 | 22.00-24.00 |
310 | 0.25 | 1.00 | 2.00 | 0.040 | 0.03 | 19.00-22.00 | 24.00-26.00 |
310S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
316 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
316L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
316Ti | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
410 | 0.15 | 1.00 | 1.00 | 0.040 | 0.03 | 0.60 | 11.50-13.50 |
430 | 0.12 | 0.12 | 1.00 | 0.040 | 0.03 | 0.60 | 16.00-18.00 |
Surface Finish of Stainless Steel Sheet |
Surface Finish | Definition | Application |
No.1 | The surface finished by heat treatment and pickling or processes
corresponding there to after hot rolling. | Chemical tank, pipe |
2B | Those finished, after cold rolling, by heat treatment, pickling or
other equivalent treatment and lastly by cold rolling to given
appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen
utensils. |
No.4 | Those finished by polishing with No.150 to No.180 abrasives
specified in JIS R6001. | Kitchen utensils, Electric equipment, Building construction. |
Hairline | Those finished polishing so as to give continuous polishing streaks
by using abrasive of suitable grain size. | Building Construction. |
BA/8K Mirror | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and
the copper content is lower than J4. Its processing performance is
less thanJ4. It is suitable for ordinary shallow drawing and deep
drawing products, such as decorative board, sanitary products,
sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good,
because the hardness is high (both above 96°) and the polishing is
morebeautiful, but the square tube or the curved tube (90°) is
prone to bursting. In terms of flat plate: due to the high
hardness, the board surface is beautiful, and the surface treatment
such as frosting, polishing and plating is acceptable. But the
biggest problem is the bending problem, the bend is easy to break,
and the groove is easy to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing
can be done on the decorative panel, but it is not possible with a
little difficulty. There is feedback that the shearing plate is
bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with
inner seam). The sink material has been tried to bend, 90 degrees,
but it will not continue.
J4(High Copper): It is the higher end of the J series. It is
suitable for small angle types of deep drawing products. Most of
the products that require deep salt picking and salt spray test
will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make
equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the
inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric
corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent
work hardening (non-magnetic). Equipment for seawater use,chemical,
dye, papermaking, oxalic acid, fertilizer and other production
equipment; photographs, food industry, facilities incoastal areas,
ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable
ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It
is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher
temperatures, but it is easily machined, bent, and formed. Thanks
to this combination it is used in a number of different commercial
and industrial applications including:Furnace combustion
chambers,Automotive trim and molding,Gutters and downspouts,Nitric
acid plant equipment,Oil and Gas refinery equipment,Restaurant
equipment,Dishwasher linings,Element supports and fasteners.etc.
Packing: seaworthy wooden pallets,water proof paper,pvc
film,interleaving paper, in 20' or 40' container or as per
customers' requirements. |
-- 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) |
-- 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) |
-- 40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High) |
Q1:How about the shipping fees?
Shipping costs will depend upon many factors. Express will be the
quickest but will be most expensive. Sea freight is ideal for large
quantities, but slower. Please contact us for specific shipping
quotes, which are dependent upon quantity, weight, mode and
destination.
Q2:What are your prices?
Our prices are subject to change depending on supply and other
market factors. We will send you an updated price list after you
contact us for further information.
Q3:Do you have a minimum order quantity?
Yes, we do have minimum orders for specific international products,
please contact us for more information.
